| SPEC ITEM | DESCRIPTION |
| SoC | DM&P SoC CPU Vortex86DX- 800MHz |
| Real Time Clock with Lithium Battery Backup |
| Cache | L1:16K I-Cache, 16K D-Cache L2 Cache 128KB |
| Bus | PC/104 standard compliant |
| PCI-104 (Optional) |
| BIOS | AMI BIOS |
| System Memory | 256/512MB DDR2 Onboard |
| Watchdog Timer | Software programmable from 30.5μ sec.to 512 sec. x 2 |
| sets (Watchdog 1 fully compatible with M6117D) |
| Flash Disk | Onboard 4MB SPI Flash Disk |
| MSTI EmbedDisk Module (16MB and above) |
| 44-pin IDE to Micro SD (Optional) |
| PWM | 16~24 Channels |
| I/O Interface | Enhanced IDE port (UltraDMA-100/66/33) x1 |
| RS-232 port x3 |
| RS-232/485 port x1 |
| USB port (Ver2.0) x2 |
| Parallel port x1 |
| 16-bit GPIO port x1 |
| 10/100Mbps Ethernet port x1 |
| Connectors | 2.0mm 44-pin box header for IDE x1 |
| 2.0mm 26-pin box header for Printer x1 |
| 2.0mm 20-pin box header for 16-bit GPIO x1 |
| 2.0mm 10-pin box header for USB x1 |
| 2.0mm 10-pin box header for RS-232 x4 |
| 2.0mm 8-pin header for Ethernet x1 |
| 2.54mm 5-pin box header for Keyboard x1 |
| 2.54mm 5-pin header for Mouse x1 |
| 2.54mm 3-pin header for RS-485 x1 |
| 2.54mm 2-pin header for Reset x1 |
| 2.54mm 7-pin header for Redundancy Signal x1 (Optional) |
| 2.54mm 2-pin header for System-Fail-SW x1 (Optional) |
| 1.25mm 6-pin wafer for JTAG x1 |
| Power Requirement | Single Voltage +5V @ 1.3A |
| Weight | 80g |
| Board Size | 90 x 96mm (3.54 x 3.77 inches) |
| Operating Temperature | -20°C ~ +70°C |
| -40°C ~ +85°C (Optional) |
