SPEC ITEM | DESCRIPTION |
General |
Bus Architecture | PICMG 1.0 |
SBC Size | Full-Length |
CPU |
CPU Class | Intel Pentium IV / Celeron D |
Display |
Chipset | Intel® 915GV +ICH6 chipset |
Display Interface | Chipset w/built-in integrated graphics device |
Analog display supports up to 2048 x 1536 @ 85 Hz CRT |
I/O |
I/O | USB 2.0: 6 x USB 2.0, with 1×6 JST |
Serial port: 2 ports, with 2×5 box header , supports RS232 only |
Parallel port: 1 port, with 2×13 box-header |
PS2: 1 x Mini-DIN Keyboard/Mouse,1 x 5-pin connector for external KB/ Mouse |
IDE:1 x 40-pin connector, s |
System |
BIOS | Award System BIOS |
Certifications | CE approval |
FCC Class A |
CPU | Single socket LGA775 |
Supports Intel® Pentium 4 with 533/800 MHz FSB for speeds up to 3.8 GHz |
Supports Hyper-Threading Technology |
Dimensions | 338.58 mm (L) x 122 mm (W) (13.3” x 4.8”) |
Ethernet | 2 x Intel® 82573L PCI Express Gigabit Ethernet LAN |
2-pin header for extended LAN LED |
Supports Boot From LAN (PXE) |
Supports Wake On LAN (When 5Vsb power available) |
Expansion Interface | Advanced Power Management and Advanced Confi guration & Power Interface support |
HyperTransport™ Technology | Through PCI to ISA Interface |
No ISA Master Device Support. / No Support for ISA DMA |
Maximum of 3 ISA slots supported |
Memory | 4 x 240-pin DIMM sockets, up to 4 GB Dual channel non-ECC DDR2 400/533 MHz. Note: Maximum 4GB. Actual memory size is dynamic based on the OS I/O resource allocation |
Operating Temperature | Board level operating temperature: 0°C to 60°C |
Storage temperature: -20°C to 80°C |
Relative humidity: 10% to 90% (Non-condensing) |
Power Consumption | 5 V : 20 A |
12 V: 15 A |
5 Vsb : 1.5 A |
Power Supply | Power source from backplane through PCI/ISA Golden Finger |
Supports both AT or ATX Power Supplies (Automatically) |
+3.3 V is converted from +5 V and not directly from backplane or power supply |
+5 Vsb (Standby power) is connected from backplane via a |
RTC | On-chip RTC with battery backup |
1 x External Li Battery |
SSD | Disk On Module: 1 x 2-pin power connector for DOM |
System Monitor | System monitor controller from Super I/O |
8 voltage (For +1.5 V, +3.3 V, +5 V, -5 V, +12 V, -12 V, Vcore and +5 Vsb) |
2 temperature (For CPU and system) |
3 fan speed monitors (one for CPU and 2 for systems) |
Watchdog Timer | 1-minute increments from 1 to 255 minutes |
1-second increments from 1 to 255 seconds |